Summary of specific chemicals forbidden from sewer disposal The following chemicals must not be discharged to the sanitary sewer in any concentration. Solid or Viscous Wastes. This list contains examples of specific chemicals and does NOT include all chemicals with limited discharge to the sewer. Priority Pollutant Wastes. Biological waste intended for sewer disposal must not be prohibited from sewer disposal based on the criteria described in the previous section. Chlorinated hydrocarbons are compounds that contain chlorine, hydrogen, and carbon. Specific examples: Fumaric acid Glutaric acid 1,5-pentanedioic acid Malic acid Malonic acid 1,3-propanedioic acid Oxalic acid 1,2-ethanedioic acid Succinic acid 1,4-butanedioic acid Tartaric acid Hydroxyalkanoic acids with 5 or fewer carbon atoms and the ammonium, sodium, and potassium salts of these acids with 20 or fewer carbon atoms. Wastes that may cause a discoloration or that may cause interference in the Metro wastewater treatment plant must not be discharged to the sewer. Contact VEHS for evaluation of specific waste containers.
p-Cresol. m-Cresol. solution consists of 2 parts polyethylene glycol to 1 part ethanol. Identification of the substance/mixture and of the company/undertaking. Product identifier Synonyms. MP5P, Pale Cresylic Acid. glycol to 1 part ethanol. Identification of the substance/mixture and of the company/undertaking MP45, Cresol/Phenol/Xylenol mixture, Cresylic acid.
. glycol to 1 part ethanol.
Raw Chemical Waste.
Ignitable Wastes. Depending on the nature of the waste, it may be discharged to the normal trash or collected and managed as hazardous waste. Nuisance Waste.
Solid or viscous wastes that may coat, clog, or otherwise cause obstruction to the flow of sewer pipes must never be discharged to the sewer.
Composition/information on ingredients mix-cresol. 0 - Cresylic Acid. Phenol, Methyl- (9 CI). CH3C6H4OH. C Toxic compound, do not ingest or inhale.
Avoid all contact with this material. Corrosive to eyes and. Safety Data Sheet according to WHS and ADG requirements.
Video: Cresylic acid mixture msds ethanol Ethanol Plus Nitric Acid - Spontaneous Reaction
Issue Date: Relevant identified uses of the substance or mixture and uses advised against . cresylic acid. ppm. Not Available ethanol. 3, [LEL] ppm.
Solid or Viscous Wastes. Wastes that contain any element or compound that cannot be adequately treated or removed by the Metro wastewater treatment plant biological activated sludge treatment and that is known to be an environmental hazard must not be discharged to the sewer. Specific examples: Ethylene diamine Hexamethylene diamine and isomers Pentamethylenediamine and isomers Piperazine 1,2-Propanediamine 1,3-Propanediamine Triethylenediamine Alkanoic acids with 5 or fewer carbon atoms and the ammonium, sodium, and potassium salts of these acids with 20 or fewer carbon atoms.
A compound is considered water soluble if it dissolves to the extent of at least three percent. Ignitable wastes include mixtures of ignitable chemicals with other materials if the mixture still exhibits the ignitability characteristic i. Heavy Metal Waste. Vanderbilt University is required to comply with sewer disposal restrictions established by the Metro wastewater treatment plant and all applicable State and Federal regulations.
Cresylic acid mixture msds ethanol
|If the total volume of waste to be disposed is greater than four liters per day, approval by VEHS is required.
Ethidium Bromide and Acrylamide Waste. Records of sewer disposal must be maintained on the Radioactive Sink Disposal Log. Specific examples: Acetonitrile Butyronitrile Isobutylnitrile Propionitrile Sulfonic acids and sodium and potassium salts of the acids. Liquid or vapor wastes with a temperature above
Guide to Laboratory Sink/Sewer Disposal of Wastes Vanderbilt Environmental Health and Safety
Cresylic acid has an odor resembling that of creosote. Chemical formula: Chemical Safety Data Sheet SD Sigma-Aldrich; Material Safety Data Sheet for o-Cresol, Product Number: C, Version (Revision Date 06/30/). Miscible with ethanol, chloroform and ether. Relative density of the vapour/air-mixture at 20 °C (air = 1): meta-Cresol, also 3-methylphenol, is an organic compound with the formula CH3C6H4(OH).
Toxic in contact with the skin or if swallowed. Safety data sheet · External MSDS · GHS pictograms · GHS Corrosive GHS Toxic GHS Health hazard.
Common reactive wastes found in laboratories include certain cyanides, sulfides, and silanes or any mixtures of multiple wastes that exhibit reactivity characteristics. Biological waste intended for sewer disposal must not be prohibited from sewer disposal based on the criteria described in the previous section.
Untreatable Waste. Contact VEHS for evaluation of specific waste containers. Specific examples: 3-Amino butyric acid 4-Amino butyric acid Amino isobutyric acid 5-Amino pentanoic acid and isomers 3-Amino propanoic acid Esters with 4 or fewer carbon atoms.
Managing Chemical Waste.